Kreg Pocket-Hole Screw Kit 675pce Sk03

It's a good buy for the price, and the pack is ideal for starters. Looking forward to buy some more of other screw lengths.

Très bonne boîte, Vis kreg en grosse quantité , dommage qu'il n'y a pas d'autres dimensions de vis pour des épaisseurs de bois plus épaisseur comme du 22mm ou du 40 mm j'ai mis 5 étoiles car vis de très bonne qualité.

A well needed assortment of furniture building / repair screws for furniture

Kreg Pocket Hole Screws work well with the Kreg Pocket hole Jig system.This system uses a jig for drilling a pilot hole and a clearance hole in material to be joined, possibly at the same time.Having pre drilled your pocket holes and with clamps holding pieces together while they're joined makes for strong joints with the minimum of cutting and often strong enough without being glued.There are two types of screw head; pan head or washer head.Both have a proprietary square driver socket.There are two types of thread; coarse and fine, which work better in different materials,.Fine thread for hardwoods with close grain and coarse thread for wide grain soft woods and chipboards.There is a good starter selection here which goes well with the Kreg jig systems supplementing the sample selection of screws you get with the K4 or K5 kits.If buying as a present the Screw kit would go well with either jig kit.If buying screws for a planned project you might be better buying the right size[s] in bulk.The screw length required depends upon the thickness of the materials to be joined. This set has a reasonable selection but lacks any 2 inch screws which you get as samples with a K4 or K5 system.One other reviewer refers to this.There are more 1 and 1/4 inch screws in the set because I suppose 18mm stock is quite common for book cases and shelves etc.The Blue Kote screws included for external use are very distinctive and decorative considering they're not meant to be seen.

As the title days, a good selection of screws for pocket hole work. For me, the inclusion of some 3/4 inch ones would have been useful.

This kit is great, if you're building anything and want to conceal the construction methods, or are using angles, this is a great tool.My gripe with it is two-fold.Firstly there is no obvious reason for the square drive system, and I wouldn't object to it if the driver supplied was made of a higher grade material that didn't round-off so easily. I think Torx would make more sense.Secondly, the selection of screws supplied is very small, and because of the square drive you are forced to buy their own screws in order to utilise the drive bit.Using industry standards like Torx or posidrive would make more sense.Make sure you but the Kreg 855613 Face Clamp as this kit is not at all easy to use without the clamp, you will sacrifice accuracy and consistency.